Area 419 ARCALOCK 14" Universal Dovetail Rail

In stock — ships from distributor

⚠ This item is a firearm and must ship to a licensed FFL dealer. You will pick your dealer at checkout.

<p>NOTE: Rail kits now come with only one action screw and it is a longer screw. With the endless action/stock/chassis combos we found that nearly everyone was required to trim the screw for fitment anyway so the longer screw makes much more sense. MLOK HARDWARE IS NOT INCLUDED.&nbsp;</p><p>Area 419 is always looking for ways to improve existing products when&nbsp;not developing new technologies. With the rapid growth in popularity of ARCA rails in precision rifle ARCA&nbsp;saw a need to improve this great dovetail technology to something that could be mechanically locked in place instead of just friction.&nbsp; If you have ever tried using a Barricade stop on an existing ARCA rail you&rsquo;ve probably also seen it slide under much pressure.</p><p>Introducing the&nbsp;<strong>ARCALOCK</strong>&nbsp;Dovetail Rail System *Rail is only locking with an Area 419 clamp*</p><p><strong>Rail Features:</strong></p><ul> <li>Universal rail design is the same footprint as our previous rail.&nbsp;(There were two revisions to the hole spacing if you have a very early model your hole spacing may change)</li> <li>Serrated rail sides interface with our proprietary clamp design to mechanically lock it in place so no movement is possible.&nbsp;Serrations are not sharp will not damage bags or your hands.</li> <li>65 Locking positions available on the 14&Prime; rail</li> <li>Rail is backwards compatible with standard Arca accessories but will not be locking without our clamp</li> <li>Serrated fixed rear barricade stop is same as before but now we include an extension plug to raise it by another 1/2&Prime;</li> <li>Rail is 14&Prime; long giving you the entire length of the stock forend for attachments.&nbsp; The best part is it still only weighs in at a paltry 5.6oz</li> <li>Made to the RRS 1.5&Prime; Dovetail Standard so you can be sure lever clamps will work</li> <li>No sharp edges. Every corner is radiused and every edge is chamfered on the machine. This takes longer to make but it is the only right way.</li> <li>While designed with Manners Composite Stocks in mind this rail accommodates a multitude of rifle and stock configurations that have an accessible front action screw and some sort of front attachment point(s).</li> <li>Spacers for rifle stocks with non-flat forends are available</li> <li>Designed to attach to the rifle up to 4 places for maximum strength and stability.</li> <li>Extends past the end of most rifle stocks allowing a further forward bipod attachment increasing stability.</li> <li>Type 3 Hard Coat anodized for additional durability.</li> <li>Made from 6061-T6 Aluminum</li> <li>Made in-house here in the USA from USA sourced Aluminum on USA made CNCs</li> <li>Rail comes with one Remington 700-style action screws of extended length to fit the rail to the front action screw attachment point.&nbsp; Some trimming will likely be required.</li> <li>A 3/4&Prime; paddle bit and drill press may be required for installation of tee-nuts depending on current rifle configuration.&nbsp; Tee nuts and hardware included.</li> <li>Rail Weight: 14&Prime; = 156.03 Gram</li></ul>