Rise Anti-Walk Pins

In stock — ships from distributor

⚠ This item is a firearm and must ship to a licensed FFL dealer. You will pick your dealer at checkout.

<p>The RISE Anti Walk Trigger Pins set includes all of the following:</p><ul> <li>One (1) trigger pin</li> <li>One (1) hammer pin</li> <li>Four (4) screws</li> <li>Two (2) Allen wrenches for easy installation</li></ul><p>Also the specs are as follows:</p><ul> <li>Pin diameter .154 inches</li> <li>Pin material: Stainless steel</li> <li>Backed by lifetime guarantee</li> <li>Made in America</li></ul><p>The torque spec on the screw is 11 inch-pounds maximum; however 8 inch-pounds of torque is the recommended amount.</p><p>Note: The external width of AR receivers varies in the trigger/hammer pin area depending on the manufacturer. If the pins are too long for your receiver you may shorten the pins a small amount by carefully filing material evenly from both ends of the pins. However this is not required. Longer pins will not affect the function or performance of the rifle.</p><p>The torque spec on the screw is 11 inch-pounds maximum; however 8 inch-pounds of torque is the recommended amount.</p><p>Note: The external width of AR receivers varies in the trigger/hammer pin area depending on the manufacturer. If the pins are too long for your receiver you may shorten the pins a small amount by carefully filing material evenly from both ends of the pins. However this is not required. Longer pins will not affect the function or performance of the rifle.</p>